Medium and low pressure hose

Thermoplastic high-pressure hose

Ø  It is suitable for most low-pressure gasoline or motor cleaning machines, which can be replaced or spliced.

Ø  Standard products are M22 long-sleeve rotary cap interface, PE inner hose, polyester wire woven and thermoplastic PVC jacket.

Ø  Scratch resistance, wear resistance, twist resistance and cold resistance.

 Steel wire braided high pressure hose

Ø  Durable steel wire braided high pressure hose, rubber inner hose and rubber cloth outer sleeve.

Ø  The hose of 30MPa is 2-layer steel wire braiding, the hose of 70MPa is 4-layer steel wire braiding, and the pressure resistance is 4 times of the working pressure.

Ø  The standard 3 / 8 "quick connect joint below 30MPa is provided with the most common inner hose's diameter of 1 / 4", 5 / 16 ", 3 / 8", single layer and double layer steel wire braiding, and the length of 10m, 15m, 20m, 30m can be selected.

Hot water steel wire braided high pressure hose

Ø  High temperature resistant steel wire braided high-pressure hose, rubber inner hose, green rubber cloth coat without mark.

Ø  The pressure resistance is 4 times of the working pressure.

Ø  3 / 8 "external thread, single-layer and double-layer steel wire braiding, the length of 10m, 15m, 20m, 30m is optional.

Ø  The maximum working temperature is 150 ℃.